Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

871

872

873

874

875

876

877

878

879

880

To reset the MTU value, use the no mtu value command.

Parameters

value Enter the maximum transmission unit value in bytes. The range is from 1,280 to

11,982 bytes.

Defaults 0

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Related Commands

• ipv6 nd ra-guard enable — Allows you to congure the RA guard related commands.

• ipv6 nd raguard policy policy-name — Denes the RA guard policy name and enter the RA guard policy

conguration mode.

other-cong-ag

Enable the verication of the advertised other conguration parameter. If this command is not congured, the verication process is

bypassed.

Syntax

other-config-flag {on | off}

To reset the other conguration parameter, use the no other-config-flag {on | off} command.

Parameters

on Enter the keyword on to set the other-cong-ag value as ON.

o Enter the keyword off to set the other-cong ag value as OFF.

Defaults none