Administrator Guide

fe80:0000:0000:0000:0201:e8ff:fe8b:7720
Aug 25 11:19:59: %STKUNIT0-M:CP %BFDMGR-1-BFD_STATE_CHANGE: Changed session
state to Init for neighbor fe80::201:e8ff:fe8b:7720 on interface Te 1/2/1
(diag: NBR_DN)
Aug 25 11:20:00: %STKUNIT0-M:CP %BFDMGR-1-BFD_STATE_CHANGE: Changed session
state to Up for neighbor fe80::201:e8ff:fe8b:7720 on interface Te 1/2/1 (diag:
NO_DIAG)
00:59:45 : OSPFv3INFO: OSPFV3 got BFD msg
00:59:45 : OSPFv3INFO: Bfd Msg Type Up for interface Te 1/2/1
00:59:45 : OSPFv3INFO: OSPFV3 updating NBR state
default-information originate
Congure the Dell Networking OS to generate a default external route into an OSPFv3 routing domain.
Syntax
default-information originate [always] [metric metric-value] [metric-type type-
value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information must
always be advertised.
metric metric-value (OPTIONAL) Enter the keyword metric then a number to congure a metric value for
the route. The range is from 1 to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then an OSPFv3 link state type of 1 or
2 for default routes. The values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established route
map.
Defaults Disabled.
Command Modes ROUTER OSPFv3
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for C-Series.
7.4.1.0 Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1139