Administrator Guide

CONFIGURATION TERMINAL BATCH
Error Strings NONE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000, S6000,
S6000–ON, the Conguration Terminal Batch mode on C9010, Z9100–ON, and Z9500.
9.9(0.0) Introduced on the C9010.
Usage Information
The dot1x profile command congures a dot1x prole to dene a list of trusted supplicant MAC addresses.
Maximum number of dot1x proles is limited to 10. This command launches dot1x prole mode for entering prole
related commands such as the mac command. The dot1x static-mab command assigns the dot1x prole to
an interface.
Use this command in Conguration Terminal Batch mode to congure the dot1x prole in a dual-homing setup.
Related Commands
• dot1x static-mab
• mac
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 65535. The default is 60.
Defaults 60 seconds
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
166 802.1X