Administrator Guide

Example displaying
queue range
Dell# show hardware stack-unit 0 buffer unit 0 interface all queue 6 buffer-
info
Buffer Stats for Front End Ports
================================
----- Buffer Stats for Interface Te 1/1/1 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/1/1 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/2/1 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/3/1 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/4/1 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/5/1 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/6/1 Queue 6 -----
<output truncated for brevity>
Related Commands
• clear hardware system-ow — clear the statistics from selected hardware components.
• show interfaces stack-unit — display information on all interfaces on a specic S-Series stack member.
• show processes cpu (S-Series) — display the CPU usage information based on the processes running in an S-
Series.
• show system — display the current status of all the stack members or a specic member.
show hardware stack-unit
buer
Display the counters for the specied port, minimum guaranteed buer of a priority-group, and the shared buer.
Syntax
show hardware stack-unit stack-unit-number buffer {total-buffer | unit unit-
number {total-buffer | interface all {buffer-info | priority-group {id | all}
buffer-info | queue {id| all} buffer-info}}}
Parameters
stack-unit unit-
number
Enter the keywords stack-unit to select a particular stack member and then enter
one of the following command options to display a collection of data based on the option
entered.
buer unit <0–0> Enter the keyword buffer. To display the total buer statistics for the stack unit, enter
the keyword total-buer. To display the buer statistics for a specic unit, enter the
keyword unit and a unit number 0 .
interface interface
Enter the keyword interface followed by the keyword all to display buer statistics for
all interface.
Debugging and Diagnostics 537