Administrator Guide

Fields Description
configuration takes effect. The admin operational status for a DCBx
exchange of PFC configuration is enabled or disabled.
Remote is enabled; Priority list Remote Willing Status is enabled Operational status (enabled or disabled) of peer device for DCBx
exchange of PFC configuration with a list of the configured PFC
priorities. Willing status of peer device for DCBx exchange (Willing
bit received in PFC TLV): enabled or disabled.
Local is enabled DCBx operational status (enabled or disabled) with a list of the
configured PFC priorities
Operational status (local port) DCBx operational status (enabled or disabled) with a list of the
configured PFC priorities.
Port state for current operational PFC configuration:
• Init: Local PFC configuration parameters were exchanged with
peer.
• Recommend: Remote PFC configuration parameters were
received from peer.
• Internally propagated: PFC configuration parameters were
received from configuration source.
PFC DCBx Oper status Operational status for exchange of PFC configuration on local port:
match (up) or mismatch (down).
State Machine Type Type of state machine used for DCBx exchanges of PFC
parameters:
• Feature: for legacy DCBx versions
• Symmetric: for an IEEE version
TLV Tx Status Status of PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV: FCOE TLV Tx Status Status of FCoE advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
Application Priority TLV: ISCSI TLV Tx Status Status of ISCSI advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
Application Priority TLV: Local FCOE Priority Map Priority bitmap used by local DCBx port in FCoE advertisements in
application priority TLVs.
Application Priority TLV: Local ISCSI Priority Map Priority bitmap used by local DCBx port in ISCSI advertisements in
application priority TLVs.
Application Priority TLV: Remote FCOE Priority Map Status of FCoE advertisements in application priority TLVs from
remote peer port: enabled or disabled.
Application Priority TLV: Remote ISCSI Priority Map Status of iSCSI advertisements in application priority TLVs from
remote peer port: enabled or disabled.
PFC TLV Statistics: Input TLV pkts Number of PFC TLVs received.
PFC TLV Statistics: Output TLV pkts Number of PFC TLVs transmitted.
PFC TLV Statistics: Error pkts Number of PFC error packets received.
PFC TLV Statistics: Pause Tx pkts Number of PFC pause frames transmitted.
PFC TLV Statistics: Pause Rx pkts Number of PFC pause frames received
The following example shows the show interface pfc statistics command.
DellEMC#show interface teng 1/1/1 pfc statistics
Interface TenGigabitEthernet 1/1/1
Interface Priority Rx XOFF Frames Rx Total Frames Tx Total
Frames
----------------------------------------------------------------------------------------------
-
254
Data Center Bridging (DCB)