Concept Guide

SNMP over IPv6
You can congure SNMP over IPv6 transport so that an IPv6 host can perform SNMP queries and receive SNMP notications from a
device running Dell EMC Networking OS IPv6. The Dell EMC Networking OS SNMP-server commands for IPv6 have been extended to
support IPv6. For more information regarding SNMP commands, refer to the SNMP and SYSLOG chapters in the Dell EMC Networking OS
Command Line Interface Reference Guide.
• snmp-server host
• snmp-server user ipv6
• snmp-server community ipv6
• snmp-server community access-list-name ipv6
• snmp-server group ipv6
• snmp-server group access-list-name ipv6
Displaying IPv6 Information
View specic IPv6 conguration with the following commands.
• List the IPv6 show options.
EXEC mode or EXEC Privileged mode
show ipv6 ?
Example of show ipv6 Command Options
DellEMC#show ipv6 ?
accounting IPv6 accounting information
cam IPv6 CAM Entries
fib IPv6 FIB Entries
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
DellEMC#
Displaying an IPv6 Interface Information
To view the IPv6 conguration for a specic interface, use the following command.
• Show the currently running conguration for the specied interface.
EXEC mode
show ipv6 interface interface {slot/port[/subport]}
Enter the keyword interface then the type of interface and slot/port information:
– For all brief summary of IPv6 status and conguration, enter the keyword brief.
– For all IPv6 congured interfaces, enter the keyword configured.
458
IPv6 Routing