Concept Guide
Display summary information about a color policy for a specic interface.
DellEMC# show qos dscp-color-policy summary tengigabitethernet 1/10/1
Interface dscp-color-map
TE 1/10/1 mapONE
Display detailed information about a color policy for a specic interface
DellEMC# show qos dscp-color-policy detail tengigabitethernet 1/10/1
Interface TenGigabitEthernet 1/10/1
Dscp-color-map mapONE
yellow 4,7
red 20,30
Create Policy Maps
There are two types of policy maps: input and output.
Creating Input Policy Maps
There are two types of input policy-maps: Layer 3 and Layer 2.
1 Create a Layer 3 input policy map.
CONFIGURATION mode
policy-map-input
Create a Layer 2 input policy map by specifying the keyword layer2 with the policy-map-input command.
2 After you create an input policy map, do one or more of the following:
Applying a Class-Map or Input QoS Policy to a Queue
Applying an Input QoS Policy to an Input Policy Map
Honoring DSCP Values on Ingress Packets
Honoring dot1p Values on Ingress Packets
3 Apply the input policy map to an interface.
Applying a Class-Map or Input QoS Policy to a Queue
To apply a class-map or input QoS policy to a queue, use the following command.
• Assign an input QoS policy to a queue.
POLICY-MAP-IN mode
service-queue
Applying an Input QoS Policy to an Input Policy Map
To apply an input QoS policy to an input policy map, use the following command.
• Apply an input QoS policy to an input policy map.
POLICY-MAP-IN mode
policy-service-queue <number> qos-polcy
758
Quality of Service (QoS)