FAQ

Overall Test Results: Passed
Show Optics in System
Port # Name Status Type Part Number Rev Serial Number
------ ------------ ------ ------- --------------- --- ---------------
1 SFP 1 PRESENT None 616740000 C CN0C6Y7M65Q8WP3
2 SFP 2 PRESENT None 616740000 C CN0C6Y7M65Q8WP3
Testing Memory Regions:
Testing Memory Region 0:
Address Read Test ......................................... Passed
Address Write Test ........................................ Passed
Address Walking 1's Test .................................. Passed
Address Walking 0's Test .................................. Passed
Data Read Test ............................................ Passed
Data Write Test ........................................... Passed
Data Walking 1's Test ..................................... Passed
Data Walking 0's Test ..................................... Passed
Data Sliding 1's Test ..................................... Passed
Data Sliding 0's Test ..................................... Passed
Data Pattern Test ......................................... Passed
Memory: Overall test results -------------------------- >>> Passed
MAC Addr Test ........................................... Passed
Mounted Filesystem Devices:
DMA pool size: 8388608
AXI unit 0: Dev 0x8443, Rev 0x11, Chip BCM53443_B0, Driver BCM56160_A0
sysconf_probe successful
global_sal_config successful
*** 1 BCM devices are detected
SOC unit 0 attached to PCI device BCM53443_B0
Current mode is now ESW
I2C: detected 0 devices
Diag NPU initialization over
Test link_status_test for NPU 0 ..................... Passed
Test snake_traffic_test for NPU 0 ..................... Passed
Test prbs_mac_test for NPU 0 ..................... SKIPPED <<<---
Test prbs_ext_test for NPU 0 ..................... SKIPPED <<<---
NPU tests ....................................... Passed
Running Extended Tests:
Testing RTC Devices .......................
Testing RTC Device for rollover .......................
Set Current RTC date to 1/1/2000, RTC time to 00:00:59.
Set Current RTC date to 1/1/2000, RTC time to 00:59:59.
Set Current RTC date to 1/1/2000, RTC time to 23:59:59.
Set Current RTC date to 1/31/2000, RTC time to 23:59:59.
Set Current RTC date to 12/31/2000, RTC time to 23:59:59.
Set Current RTC date to 12/12/2014, RTC time to 11:21:23.
Passed
Testing Storage Devices ....................... Passed
LED Test Started... Will take few mins to complete.
Overall LED test result ====>> Passed
EDA: Overall test results ----------------------------- >>> Passed
The EDA tool tests the platforms using the default_eda_script.cfg conguration le. This script dictates how EDA runs and which test runs
rst or multiple times. Each line of the script is the actual prompt command line including parameters.
14
ONIE diagnostics