FAQ

Dell EMC diagnostics

The following describes the Dell EMC diagnostics. These instructions apply to systems for which the ONIE diagnostics are not available.

ONIE expansion

To view all the ONIE commands available, from the ONIE prompt, enter onie- and click <tab> twice.

ONIE:/ # onie-

onie-boot-mode onie-fwpkg onie-syseeprom

onie-console onie-nos-install onie-sysinfo

onie-discovery-start onie-self-update onie-uninstaller

onie-discovery-stop onie-support

Topics:

• S6000–ON system information

• S6000–ON factory defaults restore

S6000–ON system information

To view your S6000–ON system information; for example, the model, part number, serial number, and service tag, follow these steps.

1 Boot into ONIE.

2 Enter the onie-syseeprom command.

ONIE:/ # onie-syseeprom

Example of the onie-syseeprom Command

TlvInfo Header:

Id String: TlvInfo

Version: 1

Total Length: 78

TLV Name Code Len Value

-------------------- ---- --- -----

MAC Addresses 0x2A 2 129

Base MAC Address 0x24 6 00:05:33:6A:BF:4D

Vendor Name 0x2D 4 Dell

Product Name 0x21 8 S6000-ON

Part Number 0x22 6 08YWFG

Serial Number 0x23 12 DLCN13980015

Label Revision 0x27 3 A00

Manufacturer 0x2B 1 1

Service Tag 0x2F 2 ABC1AB2

Loader Version 0x29 8 x.xx.x.x

CRC-32 0xFE 4 0xC1EB87D1

Checksum is valid.

S6000–ON factory defaults restore

If you need to restore the S6000–ON factory defaults, reboot the system to ONIE Rescue mode.

If it is not possible to do this with the operating system you installed, reboot the system and from Grub and select ONIE: Rescue.

Dell EMC diagnostics 23