FAQ

CAUTION: Restoring factory defaults erases any installed operating system and requires a long time to erase storage.
ONIE Rescue bypasses the installed operating system and boots the system into ONIE until you reboot the system. After ONIE Rescue
completes, the system resets and boots to the ONIE console.
1 Restore the S6000–ON factory defaults from Grub using the ONIE: Rescue command.
Use the up and down arrow keys to select which entry is highlighted. Press Enter to select an operating software-selected OS or enter
e to edit the commands before booting. Enter c for a command line. The highlighted entry (*) executes automatically in the operating
system.
GNU GRUB version 2.02~beta2+e4a1fe391
+---------------------------------+
| ONIE: Install OS |
| *ONIE: Rescue |
| ONIE: Uninstall OS |
| ONIE: Update ONIE |
| ONIE: Embed ONIE |
| DELL EMC DIAG |
| |
| |
| |
| |
| |
+---------------------------------+
2 Press ENTER to activate the console.
3 You can also use the onie-uninstaller command to return to the default ONIE settings.
ONIE:/ # onie-uninstaller
Erasing unused NOR flash region Erasing 128 Kibyte @ 20000 - 100% complete. Erasing internal
mass storage device: /dev/mmcblk0 (7832MB) Percent complete: 100%
24
Dell EMC diagnostics