Install Guide

Figure 8. Two-post center-mount conguration

2 Slide the back bracket towards the post and secure it to the post ange with two user-supplied screws, item 2.

3 Repeat this procedure for the second rail.

Four-post threaded conguration

CAUTION

: To be NEBS Earthquake Z4-compliant, you must remove the tool-less latch castings described in Step 1.

1 Remove the tool-less latch castings from each end of the ReadyRails assemblies.

Use a Torx driver to remove the two screws from each latch casting. Remove each casting, item 1. Retain the castings for future rack

requirements.

S6000–ON installation