Install Guide

Specications
This chapter lists the S6000–ON specications.
CAUTION: Operate the product at an ambient temperature not higher than 40°C.
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
Chassis physical design
Table 2. Chassis physical design
Parameter Specications
Height 1.71 inches (43.5 mm)
Width 17.08 inches (434 mm)
Depth 18.11 inches (460 mm)
Weight 16.12 lbs (7.32 kg)
Table 3. Environmental parameters
Parameter Specications
Operating temperature 32° to 113°F (0° to 45°C)
Operating humidity 5 to 90% (RH), non-condensing
Storage temperature –40° to 158°F (–40° to 70°C)
Storage humidity 5 to 95% (RH), non-condensing
Maximum thermal output 419.7 BTU/hr
Table 4. AC power requirements
Parameter Specications
Power supply 100–240 VAC 50/60 Hz
Maximum current draw per system
2.9 A @ 280 watts/100vac
9
Specications 35