Service Manual

Commas
The following is an example of how to use commas to add dierent interface types to the range, enabling all TenGigabitEthernet
interfaces in the range 5/1/1 to 5/4/4 and both TenGigabitEthernet interfaces 1/1/1 and 1/1/2.
Example of Adding Interface Ranges
Dell(config-if)# interface range tengigabitethernet 5/1/1 - 5/4/4, tengigabitethernet 1/1/1
- 1/1/2
Dell(config-if-range-te-5/1/1-5/4/4)# no shutdown
Add Ranges
The following example shows how to use commas to add VLAN and port-channel interfaces to the range.
Example of Adding VLAN and Port-Channel Interface Ranges
Dell(config-if-range-te-1/1/1-1/1/2)# interface range Vlan 2 – 100 , Port 1 – 25
Dell(config-if-range-te-1/1/1-1/1/2-vl-2-100-po-1-25)# no shutdown
Dening Interface Range Macros
You can dene an interface-range macro to automatically select a range of interfaces for conguration.
Before you can use the macro keyword in the interface-range macro command string, dene the macro.
To dene an interface-range macro, use the following command.
• Denes the interface-range macro and saves it in the running conguration le.
CONFIGURATION mode
define interface-range macro_name {vlan vlan_ID - vlan_ID} | {{gigabitethernet |
tengigabitethernet | fortyGigE} slot/interface - interface} [ , {vlan vlan_ID - vlan_ID}
{{gigabitethernet | tengigabitethernet | fortyGigE} slot/interface - interface}]
Dene the Interface Range
The following example shows how to dene an interface-range macro named “test” to select Fast Ethernet interfaces 5/1 through
5/4.
Example of the define interface-range Command for Macros
Dell(config)# define interface-range test gigabitethernet 5/1 - 4
Choosing an Interface-Range Macro
To use an interface-range macro, use the following command.
• Selects the interfaces range to be congured using the values saved in a named interface-range macro.
CONFIGURATION mode
interface range macro name
Example of Using a Macro to Change the Interface Range Conguration Mode
The following example shows how to change to the interface-range conguration mode using the interface-range macro named
“test.”
Dell(config)# interface range macro test
Dell(config-if)#
342
Interfaces