Service Manual

show file-systems

The output of the show file-systems command in the following example shows the total capacity, amount of free memory, le

structure, media type, read/write privileges for each storage device in use.

Dell#show file-systems

Size(b) Free(b) Feature Type Flags Prefixes

520962048 213778432 dosFs2.0 USERFLASH rw flash:

127772672 21936128 dosFs2.0 USERFLASH rw slot0:

- - - network rw ftp:

- - - network rw tftp:

- - - network rw scp:

You can change the default le system so that le management commands apply to a particular device or memory.

To change the default directory, use the following command.

• Change the default directory.

EXEC Privilege mode

cd directory

View Command History

The command-history trace feature captures all commands entered by all users of the system with a time stamp and writes these

messages to a dedicated trace log buer.

The system generates a trace message for each executed command. No password information is saved to the le.

To view the command-history trace, use the show command-history command.

Example of the show command-history Command

Dell#show command-history

[12/5 10:57:8]: CMD-(CLI):service password-encryption

[12/5 10:57:12]: CMD-(CLI):hostname Force10

[12/5 10:57:12]: CMD-(CLI):ip telnet server enable

[12/5 10:57:12]: CMD-(CLI):line console 0

[12/5 10:57:12]: CMD-(CLI):line vty 0 9

[12/5 10:57:13]: CMD-(CLI):boot system rpm0 primary flash://FTOS-CB-1.1.1.2E2.bin

Upgrading Dell Networking OS

NOTE: To upgrade Dell Networking Operating System (OS), refer to the Release Notes for the version you want to load

on the system.

Using HTTP for File Transfers

Stating with Release 9.3(0.1), you can use HTTP to copy les or conguration details to a remote server. Use the copy source-le-

url http://host[:port]/le-path command to transfer les to an external server.

Enter the following source-le-url keywords and information:

• To copy a le from the internal FLASH, enter ash:// followed by the lename.

• To copy the running conguration, enter the keyword running-cong.

• To copy the startup conguration, enter the keyword startup-cong.

• To copy a le on the external FLASH, enter usbash:// followed by the lename.

Getting Started