Users Guide

street-address
Configure the street address information for the company.
Syntax
street-address {address1} [address2]…[address8]
To remove the street address, use the no street-address command.
Parameters
address1 Enter the street address for the company.
address2..addres
s8
(OPTIONAL) Enter the street address of the company site. Up to 8 fields are
allowed.
Command Modes SUPPORTASSIST COMPANY
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
This command is optional for SupportAssist service configuration.
territory
Configure the territory and set the coverage for the company site.
Syntax
territory company-territory
To remove the company territory information, use the no territory command.
Parameters
company-
territory
Enter the territory name for the company. To include a space, enter a space within
double quotes.
Command Modes SUPPORTASSIST COMPANY
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
This command is optional for SupportAssist service configuration.
SupportAssist Person Commands
Dell Networking OS supports the following SupportAssist Person mode commands.
1314
SupportAssist