Users Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
Example
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance physical-locator
Displays physical locators related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID physical—locator vtep-ip A.B.C.D
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
A.B.C.D Enter the IP address of the VTEP.
Defaults Disabled
Command Modes VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Example
Dell#show vxlan vxlan-instance 1 physical-locator
Instance : 1
Tunnel : count 1
36.1.1.1 : vxlan_over_ipv4 (up)
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance logical network
Displays logical network information related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID logical-network [name name]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
name name (OPTIONAL) Enter the keyword name and enter the name of VXLAN logical
network up to a length of maximum 30 characters.
1400 Virtual Extensible LAN (VXLAN)