Users Guide
Version Description
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.3(0.0) Introduced on the S6000 platform.
Usage
Information
The following table describes the output fields displayed for the show running-config dcb-
buffer-threshold command:
Field Description
Field Description
Profile name Name of the DCB buffer threshold profile
Priority The priority of the queue for which the buffer space settings apply
buffer-size Ingress buffer size
pause-threshold-
value
Buffer limit at which the port sends the pause to peer in KB.
resume-
threshold-value
Buffer offset limit at which the port resumes the peer in KB.
Example
Dell# show running—config dcb-buffer-threshold
!
dcb-buffer-threshold test1
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
!
dcb-buffer-threshold test2
pfc priority 0 buffer-size 80 pause-threshold 50
!
dcb-buffer-threshold test3
pfc priority 0 buffer-size 80 pause-threshold 60 resume-threshold 30
On interface on which PFC is enabled: 
Dell(conf)#do show interfaces tengigabitethernet 1/3/2 pfc buffer-threshold 
Interface TenGigabitEthernet 1/3/2
Interface   Queue#  Lossless  Buffer-size  Pause-threshold  Resume-offset  Shared Threshold  
                                  (KB)         (KB)             (KB)           Weight
---------------------------------------------------------------------------------------------
Te 1/3/2    Q0      NO        -            -                -              -               
Te 1/3/2    Q1      NO        -            -                -              -               
Te 1/3/2    Q2      NO        -            -                -              -               
Te 1/3/2    Q3      YES       200          40               9              8               
Te 1/3/2    Q4      YES       200          40               9              8               
Te 1/3/2    Q5      NO        -            -                -              -               
Te 1/3/2    Q6      NO        -            -                -              -               
Te 1/3/2    Q7      NO        -            -                -              -               
Dell(conf)#     
On interface in which PFC is not enabled: 
Dell#show interface tengigabitethernet 1/20/1 pfc buffer-threshold 
The following table describes the output fields displayed for the show interface pfc buffer-
threshold command:
Field
Description
queue Number of the queue
lossless Whether the queue is a lossy or lossless queue for which buffer threshold is
configured
buffer-size Ingress buffer size
pause-threshold-
value
Buffer limit at which the port sends the pause to peer in KB.
resume-
threshold-value
Buffer offset limit at which the port resumes the peer in KB.
420 Data Center Bridging (DCB)










