Users Guide

Example
displaying
ingress priority-
group level
snapshot for the
specific interface
Dell# show hardware buffer-stats-snapshot resource interface fortyGigE
1/1 priority-group 7
Unit 1 unit: 0 port: 1 (interface Fo 1/1)
---------------------------------------
PG# SHARED CELLS HEADROOM CELLS
---------------------------------------
7 0 0
Dell#show hardware buffer-stats-snapshot resource interface fortyGigE
1/1 priority-group all
Unit 1 unit: 0 port: 1 (interface Fo 1/1)
---------------------------------------
PG# SHARED CELLS HEADROOM CELLS
---------------------------------------
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
show hardware counters interface
Display the counter information for a specific interface.
Syntax
show hardware counters interface interface
Parameters
counters Enter the keywords counters to display counter value for the specified stack-
member the port-pipe.
interface
interface
Enter any of the following keywords and the interface information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Example
Dell# show hardware counters interfac tengigabitethernet 5/1/1
unit: 0 port: 2 (interface Te 5/1/1)
Description Value
RX - IPV4 L3 Unicast Frame Counter 0
Debugging and Diagnostics 443