Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

811

812

813

814

815

816

817

818

819

820

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.4.1.0 Introduced

Commands

● show ip msdp sa-cache rejected-sa — display the rejected SAs in the SA cache.

ip msdp default-peer

Define a default peer from which to accept all source-active (SA) messages.

Syntax

ip msdp default-peer peer address [list name]

To remove the default peer, use the no ip msdp default-peer {peer address} list name

command.

Parameters

peer address

Enter the peer address in a dotted decimal format (A.B.C.D.)

list

name

Enter the keywords list name and specify a standard access list that contains

the RP address that should be treated as the default peer. If no access list is

specified, then all SAs from the peer are accepted.

Defaults Not configured.

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.