Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

971

972

973

974

975

976

977

978

979

980

Parameters

interface

Enter the keyword interface then the name of the interface.

stack–unit

number

Enter the keyword stack-unit then the slot number.

port-set

number

Enter the keywords port-set then the port-pipe number.

summary Enter the keyword summary to view only the total number of CAM entries.

Defaults none

Command Modes EXEC

Command

History

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

Usage

Information

The show cam pbr command displays the PBR CAM content.

Example

Dell# show cam pbr stack-unit 1 port-set 0

TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,

Bit 1 - SYN, Bit 0 - FIN

Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp Next-hop Egress

Index Flag Port Port MAC Port

----------------------------------------------------------------------------------------------

00000 5 N/A IP 0x0 0 0 22.22.2.22/32 33.33.3.0/24 00:01:e8:8a:fd:76 0/0

00001 5 N/A 145 0x0 0 0 0.0.0.0/0 44.4.4.4/32 00:01:e8:8a:fd:76 Vl 100(0/1)

00002 5 N/A TCP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128

00003 5 N/A UDP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128

00004 5 N/A IP 0x0 0 0 0.0.0.0/0 0.0.0.0/0 00:01:e8:8a:fd:76 Vl 1020(Po 100)

Dell#

Commands

● ip redirect-group – applies a redirect group to an interface.

● show ip redirect-list – displays the redirect-list configuration.

show ip redirect-list

View the redirect list configuration and the interfaces it is applied to.

Syntax

show ip redirect-list redirect-list-name

Parameters

redirect-list-

name

Enter the name of a configured Redirect list.

Command Modes

● EXEC

● EXEC Privilege