Concept Guide

Example of Writing the Value of a Managed Object
> snmpset -v 2c -c mycommunity 10.11.131.161 sysName.0 s "R5"
SNMPv2-MIB::sysName.0 = STRING: R5
Conguring Contact and Location Information using
SNMP
You may congure system contact and location information from the Dell EMC Networking system or from the management station using
SNMP.
To congure system contact and location information from the Dell EMC Networking system and from the management station using
SNMP, use the following commands.
• (From a Dell EMC Networking system) Identify the system manager along with this person’s contact information (for example, an email
address or phone number).
CONFIGURATION mode
snmp-server contact text
You may use up to 55 characters.
The default is None.
• (From a Dell EMC Networking system) Identify the physical location of the system (for example, San Jose, 350 Holger Way, 1st oor
lab, rack A1-1).
CONFIGURATION mode
snmp-server location text
You may use up to 55 characters.
The default is None.
• (From a management station) Identify the system manager along with this person’s contact information (for example, an email address
or phone number).
CONFIGURATION mode
snmpset -v version -c community agent-ip sysContact.0 s “contact-info”
You may use up to 55 characters.
The default is None.
• (From a management station) Identify the physical location of the system (for example, San Jose, 350 Holger Way, 1st oor lab, rack
A1-1).
CONFIGURATION mode
snmpset -v version -c community agent-ip sysLocation.0 s “location-info”
You may use up to 55 characters.
The default is None.
Subscribing to Managed Object Value Updates using
SNMP
By default, the Dell EMC Networking system displays some unsolicited SNMP messages (traps) upon certain events and conditions.
You can also congure the system to send the traps to a management station. Traps cannot be saved on the system.
Dell EMC Networking OS supports the following three sets of traps:
Simple Network Management Protocol (SNMP)
911