Setup Guide

If either of these messages appears, Dell EMC Networking recommends coordinating with the users listed in the message so that you do
not unintentionally overwrite each other’s conguration changes.
Conguring alias command
You can congure shorter alias names for single–line command input using the alias command.
To congure the alias name, perform the following steps:
1 Congure the terminal to enter the Global Conguration mode.
EXEC Privilege mode
DellEMC#configure terminal
2 Congure the system to enter the alias-denition mode.
CONFIGURATION mode
DellEMC(conf)#alias-definition
3 Create the alias name followed by the single–line CLI.
ALIAS DEFINITION CONFIGURATION mode
DellEMC(conf-alias-definition)#alias sr show running-config
4 Display the aliases and its denition.
EXEC Privilege mode
show alias
Example of the show alias Command
DellEMC# configure terminal
DellEMC(config)# alias-definition
DellEMC(conf-alias-definition)# alias ns no shutdown
DellEMC(conf-alias-definition)# alias 10gint interface TenGigabitEthernet $1
Viewing alias conguration
To view the Alias congurations, use the following commands:
1 Display the complete list of aliases and its denitions.
EXEC Privilege mode
DellEMC#show alias
DellEMC# show alias
-----------------------------------------------------------------
Alias Name Definition
-----------------------------------------------------------------
showipbr10 show ip interface brief | ….
showipbr40 show ip interface brief | ….
shboot show bootvar…
cr-vlan interface vlan $1 ..
-----------------------------------------------------------------
Total Alias Configured : 4
-----------------------------------------------------------------
NOTE
: The alias denition displays upto 40 characters and you can view the detailed list of denitions using the
details option.
2 Display the details of all the aliases that are congured on the system.
Conguration
Fundamentals 47