Users Guide

To disable the buffer statistics tracking utility, enter the disable command from the BUFFER-STATS-
SNAPSHOT mode.
Default By default, buffer statistics tracking is disabled.
Command Modes CONFIGURATION mode
Command
History
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.7(0.0) Introduced on the S6000-ON.
9.3.0.0 Introduced on the S6000 platform
Usage
Information
Only the software-based trigger for retrieving and calculating the snapshots of the statistical counters of
the buffer space is supported. Collection of snapshots of buffer statistical counters based on hardware
threshold settings is not supported, which can be used to specify the type of hardware threshold and the
threshold profile templates.
Example
Dell(conf)#buffer-stats-snapshot
Dell(conf-buffer-stats-snapshot)#?
disable Disable buffer-stats-snapshot globally
end Exit from configuration mode
exit Exit from buffer-stats-snapshot configuration
mode
no Negate a command or set its defaults
show Show buffer-stats-snapshot configuration
Dell(conf-buffer-stats-snapshot)#no disable
Dell(conf-buffer-stats-snapshot)#show configuration
!
buffer-stats-snapshot
no disable
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-service policies to each
class.
Syntax
class-map {match-all | match-any} class-map-name [cpu-qos] [layer2]
Parameters
match-all Determines how packets are evaluated when multiple match criteria exist. Enter
the keywords match-all to determine that the packets must meet all the match
criteria in order to be a member of the class.
match-any Determines how packets are evaluated when multiple match criteria exist. Enter
the keywords match-any to determine that the packets must meet at least one of
the match criteria in order to be a member of the class.
class-map-name Enter a name of the class for the class map in a character format (32 character
maximum).
cpu-qos Enter the keyword cpu-qos to assign this Class Map to control plane traffic only
(CoPP).
layer2 Enter the keyword layer2 to specify a Layer 2 Class Map. The default is Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
1056 Quality of Service (QoS)