Users Guide
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced this version of the command for the S-Series.
Usage
Information
The output for show memory displays the memory usage of LP part (sysdlp) of the system. The sysdlp
is an aggregate task that handles all the tasks running on the S-Series’ CPU.
Example
Dell#show memory stack-unit 1
Statistics On Unit 1 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
3177185280 2310248 3174875032 3174676264 3174875032
Dell#
show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit [1-99 | details] | stack-unit id
[1-99]| summary ]
Parameters
management-unit
[
1-99
| details]
(OPTIONAL) Display processes running in the control processor. The 1-99 variable
sets the number of tasks to display in order of the highest CPU usage in the past
five (5) seconds. Add the keyword details to display all running processes
(except sysdlp). Refer to Example (management-unit).
stack-unit
id
(OPTIONAL) Enter the keyword stack-unit then the stack member ID.
As an option of the show processes cpu command, this option displays CPU
usage for the designated stack member. Or, as an option of the command, this
option limits the output of memory statistics to the designated stack member.
Refer to Example (stack-unit).
summary (OPTIONAL) Enter the keywordsummary to view CPU utilization of processes
related to stack-unit processing.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Control and Monitoring 119