Users Guide

show storm-control pfc statistics
You can view the statistical details of the PFC storm on a stack unit with specified port set.
Syntax
show storm-control pfc statistics stack-unit {unit-number} port-set
{portpipe-number
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6000, S6000–ON, S61000–ON, Z9100–ON.
Usage
Information
The show storm-control pfc statistics command is used to view the statistical data of the
PFC storm on the specified stack unit and the port set.
Example
Dell#show storm-control pfc statistics stack-unit 0 port-set 0
-----------------------------------------------------------------------
Interface Priority Discard State Discard State Clear Count
Count forced No rxPfc
-----------------------------------------------------------------------
Te 0/0 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/1 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Te 0/2 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/3 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/4 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/5 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/80 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Dell#
show storm-control broadcast
Display the storm control broadcast configuration.
Syntax
show storm-control broadcast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface-specific
storm control configuration:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the stack/slot/port/subport information.
1298 Storm Control