Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
6.1.1.0 Introduced on the E-Series.
ntp master <stratum>
Configure the switch as NTP Server.
Syntax
ntp master <stratum>
Parameters
ntp
master <stratum>
Enter the stratum number to identify the NTP Server's hierarchy.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000, and Z9500.
9.2(1.0) Introduced on the Z9500.
ntp offset-threshold
Configure the threshold time interval before which the system generates an NTP audit log message if the time difference from
the NTP server is greater than a threshold value (offset-threshold).
Syntax
ntp offset-threshold threshold-value
To disable the threshold value, use the no ntp offset-threshold command.
Parameters
offset-threshold
threshold-value
(Optional) Enter the keyword offset-threshold and then the threshold value.
The range is from 0 to 999.
Defaults Not enabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3038–ON, S4048-ON, S3100 Series, S4810P, S4820T, S5000,
S6000, S6000–ON, S6100–ON, Z9500, and Z9100–ON.
Usage
Information
The ntp offset-threshold command does not time synchronization.
1344 System Time and Date