Users Guide

Usage
Information
If you do not specify the maximum route limit for a VRF, the VRF has unlimited space that extends to the
maximum number of entries allowed for the system.
show ip vrf
Displays information corresponding to the VRFs that you configure in the system.
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf then the name of the VRF to display information
corresponding to that VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage
Information
This command displays information from the running-config corresponding to either a specific VRF or all
the VRFs in the system.
1380 Virtual Routing and Forwarding (VRF)