Users Guide

Port Vlan Bindings:
Te 1/1/9/1: VLAN: 2 (0x80000001)
Dell#show vxlan vxlan-instance 1 logical-network
Instance : 1
Total LN count : 1
Name VNID
bffc3be0-13e6-4745-9f6b-0bcbc5877f01 4656
Dell#$n-instance 1 logical-network n 2a8d5d19-8845-4365-ad04-243f0b6df252
Name : 2a8d5d19-8845-4365-ad04-243f0b6df252
Description :
Tunnel Key : 2
VFI : 28674
Unknown Multicast MAC Tunnels:
192.168.122.133 : vxlan_over_ipv4 (up)
Port Vlan Bindings:
Te 1/1/1/1: VLAN: 0 (0x80000001),
Fo 1/4/1 : VLAN: 0 (0x80000004),
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
clear vxlan vxlan-instance statistics
Clear the remote VTEP and access port statistics.
Syntax
clear vxlan vxlan-instance instance ID statistics
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to clear the remote VTEP and access port statistics.
clear mac-address-table dynamic all
Clear the MAC address table of all MAC address learned dynamically. It clears both MAC address of the VXLAN and legacy
VLAN.
Syntax
clear mac-address-table dynamic all
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide
Virtual Extensible LAN (VXLAN) 1417