Users Guide

A.B.C.D Enter the IPv4 address of the neighbor in dotted decimal format.
X:X:X:X::X (OPTIONAL) Enter an IPv6 address.
peer-group peer-
group-name
Enter the keywords peer-group then the name of the peer group to debug.
in (OPTIONAL) Enter the keyword in to view only information on inbound BGP
routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound BGP
routes.
A.B.C.D Enter the IP address of peer in the A.B.C.D format.
X:X:X:X::X Enter the IPv6 IP address of peer in the X:X:X:X::X format.
dampening Enter the keyword dampening to view BGP dampening.
events Enter the keyword events to view BGP protocol events.
ipv4 Enter the ipv4 IP address to view the IPV4 route information.
ipv6 Enter the ipv6 IP address to view the IPV6 route information.
keepalives Enter the keyword keepalives to view BGP keepalives.
notifications Enter the keyword notifications to view BGP notifications.
soft-
reconfiguration
Enter the keywords soft-reconfiguration to view only information on
inbound BGP soft reconfiguration.
updates Enter the keyword updates to view BGP updates.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
To view information on both incoming and outgoing routes, do not include the in and out parameters in
the debugging command. The in and out parameters cancel each other; for example, if you enter the
debug ip bgp in command and then enter the debug ip bgp out command, you do not see
information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands
● debug ip bgp events — view information about BGP events.
● debug ip bgp keepalives — view information about BGP keepalives.
● debug ip bgp notifications — view information about BGP notifications.
● debug ip bgp updates — view information about BGP updates.
● show debugging — view enabled debugging operations.
304 Border Gateway Protocol