Users Guide

warning-only (OPTIONAL) Enter the keyword warning-only to set the router to send a log
message when the maximum value is reached. If this parameter is not set, the
router stops peering when the maximum number of prefixes is reached.
NOTE: When you set this option, the router accepts BGP prefixes only until
the maximum configured value. After the maximum number is reached, the
router drops any additional prefixes that it receives.
Defaults threshold = 75
Command Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
If you configure the neighbor maximum-prefix command and the neighbor receives more prefixes
than the neighbor maximum-prefix command configuration allows, the neighbor goes down and the
show ip bgp summary command displays (prfxd) in the State/PfxRcd column for that neighbor. The
neighbor remains down until you enter the clear ip bgp command for the neighbor or the peer group
to which the neighbor belongs or you enter the neighbor shutdown and neighbor no shutdown
commands.
Related
Commands
● show ip bgp summary — display the current BGP configuration.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Syntax
neighbor {ip-address | peer-group-name} password [encryption-type] password
To delete a password, use the no neighbor {ip-address | peer-group-name} password
command.
Parameters
ip-address Enter the IP address of the router to be included in the peer group.
peer-group-name Enter the name of a configured peer group.
encryption-type (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means
that the password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first character of the password
must be a letter.
322 Border Gateway Protocol