Users Guide

Example
(Summary)
Dell(conf)#$ interfaces tengigabitethernet 1/1/3/1 pfc buffer-threshold
Interface TenGigabitEthernet 1/1/3/1
Interface Queue# Lossless Buffer-size Pause-threshold Resume-offset Shared Threshold
(KB) (KB) (KB) Weight
------------------------------------------------------------------------------------
Te 1/1/3/1 Q0 NO - - - -
Te 1/1/3/1 Q1 NO - - - -
Te 1/1/3/1 Q2 NO - - - -
Te 1/1/3/1 Q3 NO - - - -
Te 1/1/3/1 Q4 NO - - - -
Te 1/1/3/1 Q5 NO - - - -
Te 1/1/3/1 Q6 NO - - - -
Te 1/1/3/1 Q7 NO - - - -
show int hundredGigE 1/32 pfc detail
Interface hundredGigE 1/32
Admin mode is on
Admin is enabled
Remote is disabled
Local is enabled
Oper status is init
PFC DCBX Oper status is Down
Reason: Port Shutdown
State Machine Type is Symmetric
TLV Tx Status is enabled
PFC Link Delay 65535 pause quntams
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x0
Local ISCSI PriorityMap is 0x0
1 Input TLV pkts, 4 Output TLV pkts, 0 Error pkts, 0 Pause Tx pkts,
0 Pause Rx pkts
0 Input Appln Priority TLV pkts, 0 Output Appln Priority TLV pkts,
0 Error Appln Priority TLV Pkts
Dell(conf-lldp)#do show int hundredGigE 1/32 pfc summary
Interface hundredGigE 1/32
Admin mode is on
Admin is enabled
Remote is disabled
Local is enabled
Oper status is init
PFC DCBX Oper status is Down
Reason: Port Shutdown
State Machine Type is Symmetric
TLV Tx Status is enabled
PFC Link Delay 65535 pause quantams
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x0
Local ISCSI PriorityMap is 0x0
show interface pfc statistics
Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax
show interface port-type pfc statistics
Parameters
port-type Enter the port type and the interface information.
Data Center Bridging (DCB) 397