Users Guide
show hardware ip
Display ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set 0–0 pipeline
pipeline-number
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select between ACL or QoS
data.
stack-unit
number
Enter the keywords stack-unit then a number to select a stack ID.
port-set
0–0
Enter the keyword port-set with a port-pipe number. The range is from 0 to 0.
pipeline
pipeline-
number
Enter the keyword pipeline with a pipeline number to display the MAC ACL
entries specific to the pipeline number. The range is from 0 to 3.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated stack
member.
Syntax
show hardware stack-unit stack-unit-number {cpu {data-plane statistics |
i2c statistics | management statistics | party-bus statistics | sata-
interface statistics} | drops [unit unit-number] | fpga registers | stack-
port stack-port-number | unit unit-number {counters | details | ipmc-
replication | port-stats [detail] | register | table-dump table-name}}
Parameters
stack-unit
stack-
unit-number
{command-
option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based on
the option entered. The range is from 1 to 6.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to display the data plane
statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to display the counters of i2c
devices.
Debugging and Diagnostics 425