Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON

461

462

463

464

465

466

467

468

469

470

vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range

is from 2 to 4094.

ipv6

ipv6-

address

Enter the keyword ipv6 then the IPv6 address that is leased to the client.

interface

type

Enter the keyword interface then the type of interface to which the host is

connected:

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the stack/slot/port/subport information.

● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE

then the stack/slot/port/subport information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

stack/slot/port[/subport] information.

● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the

stack/slot/port/subport information.

●

For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then

the stack/slot/port information.

interface

number

Enter the number of the interface.

lease

value

Enter the keyword lease then the amount of time the IPv6 address are leased.

The range is from 1 to 4294967295.

Defaults None

Command Modes

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.

ip dhcp snooping database

Delay writing the binding table for a specified time.

Syntax

ip dhcp snooping database write-delay minutes

Parameters

minutes

The range is from 5 to 21600.