Users Guide

Member Ports: Te 1/1/1/1
Dell#
show ip igmp snooping mrouter
Display multicast router interfaces.
Syntax
show ip igmp snooping mrouter [vlan number]
Parameters
vlan number Enter the keyword vlan then the vlan number. The range is from 1 to 4094.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage
Information
If the port channel is a VLT port channel, an asterisk (*) after the port channel number (Po 100*)
indicates the port channel is locally down and that a remote VLT port is up.
Example
Dell# show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Te 1/1/1/1, Po 1
Dell#
Related
Commands
● ip igmp snooping mrouter — configure a static connection to the multicast router.
● show ip igmp groups — view groups.
Internet Group Management Protocol (IGMP) 545