Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series
Usage
Information
You must include the colon (:) when entering this command.
After reformatting is complete, three empty directories are automatically created on flash:
CRASH_LOG_DIR, TRACE_LOG_DIR and NVTRACE_LOG_DIR.
CAUTION: This command deletes all files, including the startup configuration file. So, after
executing this command, consider saving the running config as the startup config (use the
write memory command or copy running-config startup-config command).
Related
Commands
● copy – copy the current configuration to either the startup-configuration file or the terminal.
● show file-systems – display information about the file systems on the system.
fsck flash
Checks the flash file system for errors.
Syntax
fsck {flash: | usbflash:}
Parameters
flash:
For a directory on the internal Flash, enter flash:// directory name.
usbflash:
For a directory on the external USB flash, enter usbflash:// directory name.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.1(0.0) Introduced on S4810 and Z9000.
8.3.19.0 Introduced on S4820T.
Usage
Information
Include the colon (:) when entering this command. This command checks the specified flash memory for
errors. If errors are found, the command recommends that you format the flash.
CAUTION: If you elect to format the flash, all files – including the startup configuration file
– are lost. If you do decide to format the specified flash, consider saving the running
configuration as the startup configuration after formatting the flash (use the write
memory command or copy running-config startup-config command).
Related
Commands
● copy — copy one file to another location.
● show file-systems — display information about the file systems on the system.
File Management 59