Users Guide

mac learning-limit station-move-violation
Specify the actions for a station move violation.
Syntax
mac learning-limit station-move-violation {log | shutdown-both | shutdown-
offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-violation
command, then the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original and offending
interface and generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down the offending interface
and generate a syslog message.
shutdown-
original
Enter the keywords shutdown-original to shut down the original interface and
generate a syslog message.
Defaults None
Command Modes INTERFACE (conf-if-interface-slot/port)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage
Information
This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
● show mac learning-limit — display details of the mac learning-limit.
Layer 2 773