Users Guide

Example
Dell(conf)# banner exec ?
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)# banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)# end
Dell# exit
2d18h1m: %STKUNIT1-M:CP %SEC-5-LOGOUT: Exec session is terminated on
console
This is the banner
Dell con0 now available
Press RETURN to get started.
2d18h2m: %STKUNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful on console
This is the banner
Dell>
Related
Commands
● line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a message of the day banner to appear after logging on to the system.
Syntax
banner login {keyboard-interactive | c line c}
Enter no banner login to delete the banner text. Enter no banner login keyboard-
interactive to automatically go to the banner message prompt (does not require a carriage return).
Parameters
keyboard-
interactive
Enter the keyboard-interactive keyword and then press Enter (carriage
return) to retrieve the message banner prompt.
c Enter a delineator character to specify the start and end of the text banner. You
cannot use the delineator character in the banner message.
line Enter text string for your text banner message, with a maximum of 50 lines and up
to 255 characters per line.
Defaults No banner is configured and a carriage return (CR) is required when creating a banner.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced the keyword keyboard-interactive.
8.1.1.0 Introduced on the E-Series.
78 Control and Monitoring