Users Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Augmented to display PVLAN data for the C-Series and S-Series and revised the
output to include the Description field to display a user-entered VLAN description.
7.6.1.0 Introduced on the S-Series and revised the output to display Native VLAN.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Usage
Information
The following describes the show vlan command shown in the following example.
Column
Heading
Description
(Column 1 — no
heading)
● asterisk symbol (*) = Default VLAN
● G = GVRP VLAN
● P = primary VLAN
● C = community VLAN
● I = isolated VLAN
● O = OpenFlow
NUM Displays existing VLAN IDs.
Status Displays the word Inactive for inactive VLANs and the word Active for active
VLANs.
Q
● Displays G for GVRP tagged
● M for member of a VLAN-Stack VLAN
● T for tagged interface
● U for untagged interface
● x (not capitalized x) for Dot1x untagged
● X (capitalized X) for Dot1x tagged
● o (not capitalized o) for OpenFlow untagged
● O (capitalized O) for OpenFlow tagged
● H for VSN tagged
● i (not capitalized i) for Internal untagged
● I (capitalized I) for Internal tagged
● v (not capitalized v) for VLT untagged
● V (capitalized V) for VLT tagged
Ports Displays the type, slot, and port information.
● Po = port channel
● Te = ten-gigabit Ethernet
● Fo = forty-gigabit Ethernet
● Tf = twentyfive-gigabit Ethernet
● Fi = fifty-gigabit Ethernet
● Hu = hundred-gigabit Ethernet
Example
Dell# show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I -
Isolated
Q: U - Untagged, T - Tagged, O - Openflow
x - Dot1x untagged, X - Dot1x tagged
o - OpenFlow untagged, O - OpenFlow tagged
Layer 2 783