Users Guide

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage
Information
Enter the banner login command, type one or more spaces and a delineator character, type the banner
text, and then type the second delineator character. The message of the day banner displays first when
you are connected to the router; otherwise the login banner and prompt appear. After you have logged in,
the banner EXEC (if configured) displays.
Example
Dell(conf)# banner login ?
keyboard-interactive Press enter key to get prompt
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)#no banner login ?
keyboard-interactive Prompt will be displayed by default
<cr>
Dell(conf)#banner login keyboard-interactive
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
2d18h5m: %STKUNIT1-M:CP %SEC-5-LOGOUT: Exec session is terminated on
console
This is the banner
Dell con0 now available
Press RETURN to get started.
2d18h5m: %STKUNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful on console
This is the banner
Dell>
Related
Commands
● banner motd — sets a Message of the Day banner.
● banner exec — enables the display of a text string when you enter EXEC mode.
banner motd
Set a message of the day (MOTD) banner.
Syntax
banner motd c line c
To delete a Message of the Day banner, enter no banner motd.
Parameters
c Enter a delineator character to specify the limits of the text banner. The delineator
is a percent character (%).
line Enter a text string for your MOTD banner the message with your delineator. The
delineator is a percent character (%).
Defaults No banner is configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
Control and Monitoring 79