Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON

851

852

853

854

855

856

857

858

859

860

Parameters

vrf

vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to clear the

neighbor corresponding to that VRF.

NOTE: If you do not specify this option, the neighbors in the default VRF are

cleared.

ipv6-address

Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specific

IPv6 neighbor.

NOTE: The :: notation specifies successive hexadecimal fields of zero.

interface

To remove all neighbor entries learned on a specific interface, enter the keyword

interface then the interface type and slot/port or number information of the

interface:

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the stack/slot/port/subport information.

● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE

then the stack/slot/port/subport information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

stack/slot/port[/subport] information.

● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the

stack/slot/port/subport information.

● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then

the stack/slot/port information.

● For a port channel interface, enter the keywords port-channel then a

number.

● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100-ON.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.5(0.1) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.1 Introduced on the S4810.

debug ipv6 nd ra–guard

Enable debugging for IPv6 RA guard snooping information.

Syntax

debug ipv6 nd ra-guard [interface_type slot/port | count value]

Parameters

interface_type

slot/port

Enter the one of the following interfaces and slot/port information:

● For a port channel interface, enter the keywords port-channel then a

number.

Neighbor Discovery Protocol (NDP) 857