Administrator Guide

When using the pipe command ( | ), enter one of these keywords to lter command
output. For details about ltering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local ash drive (flash://filename. A maximum of 20 characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the le options.
7.6.1.0 Introduced on the S-Series.
Usage Information
Without the page or stack-unit option, the command output is continuous. To interrupt the command
output, use Ctrl-z.
The save option works with other ltering commands. This allows you to save specic information of a show
command. The save entry must always be the last option. For example: Dell#show tech-support |grep
regular-expression |except regular-expression | find regular-expression | save
flash://result
This display output is an accumulation of the same information that is displayed when you execute one of the
following show commands:
• show version
• show clock
• show running-config
• show system stack-ports
• show interfaces
• show process memory
• show process cpu
• show file system
• show system
• show environment
• show ip traffic
144
Control and Monitoring