Administrator Guide

Version Description
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.11.1 Introduced on the S-Series.
stack-unit location-led
Toggle the stack unit location LED on or o.
Syntax
stack-unit stack-unit-number location—led {module module-number {off | on} |
off | on}
Parameters
stack-unit stack-
unit-number
Enter the keywords stack-unit and the stack unit number.
module module-
number
Enter the keyword module then the module number to enable location LED for the
particular module. The module number range is from 1 to 4.
on | o Turn the stack unit location LED on or o.
Default
None
Command Modes
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100–ON and S5000.
9.8(1.0) Introduced on the Z9100–ON.
Example
Dell#stack-unit 1 location-led module 1 on
telnet
Connect through Telnet to a server. The Telnet client and server in Dell Networking support IPv4 and IPv6 connections. You can establish a
Telnet session directly to the router or a connection can be initiated from the router.
Syntax
telnet {host | ip-address | ipv6-address prefix-length | vrf vrf instance name}
[/source-interface]
Parameters
host Enter the name of a server.
Control and Monitoring 147