Administrator Guide

dcb-map stack-unit all stack-ports all
Apply the specied DCB map on all ports of the switch stack.
Syntax
dcb-map stack-unit all stack-ports all dcb-map-name
To remove the PFC and ETS settings in a DCB map from all stack units, use the no dcb-map stack-unit
all stack-ports all command.
Parameters
dcb-map-name Enter the name of the DCB map.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S4810 and S6000 platforms.
Usage Information The dcb-map stack-unit all stack-ports all command overwrites any previous DCB maps applied
to stack ports.
dcb pfc-shared-buer-size
Congure the maximum amount of shared buer size for PFC packets in kilobytes.
Syntax
dcb pfc-shared—buffer—size buffer-size
Parameters
buer-size Enter a number in the range of 0 to 3399.
Default The default is 1040KB.
Command Modes CONFIGURATION mode
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(2.0P0) The default value is changed to 1040 KB for the Z9100–ON and S6100–ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.6(0.0) Introduced on the S5000.
510 Data Center Bridging (DCB)