Administrator Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
• show logging — display logging settings and system messages in the internal buffer.
clear logging auditlog
Clears audit log.
Syntax
clear logging auditlog
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Introduced on the FN IOM.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the MXL.
Example
DellEMC(conf)# clear logging auditlog
Related
Commands
• show logging auditlog — display the audit log.
default logging buffered
Return to the default setting for messages logged to the internal buffer.
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Simple Network Management Protocol (SNMP) and Syslog 1445