Administrator Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
warmboot-failure-action
This CLI is used to define the system behavior in the event of a warmboot failure.
Syntax
warmboot-failure-action fastboot| normal-reload
Parameters
fastboot Do a fastboot on warmboot failure
normal-reload Do a normal reload on warmboot failure
Defaults normal-reload
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000, S6100–ON and Z9100–ON
Usage Information Enter warmboot-failure-action fastboot to restart in fastboot mode in case there is a failure of
warmboot. Enter warmboot-failure-action normal-reload to restart in normal mode in case there is a
failure of warmboot.
write
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax
write [memory [compressed] | terminal]
150 Control and Monitoring