Administrator Guide

pfc-nodrop-priority l2-dlf drop
Configure to drop the unknown unicast packets flooding on lossless priorities.
Syntax
pfc-nodrop-priority l2-dlf drop
To disable the feature, use the no pfc-nodrop-priority l2-dlf drop command.
Parameters
l2-dlf Enter the keywords l2-dlf to drop flooding traffic on lossless priorities.
drop Enter the keyword drop to enable the drop action.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Related
Commands
show hardware pfc-nodrop-priority — displays the packets drop count corresponding to the priority.
pfc no-drop queues
Configure the port queues that still function as no-drop queues for lossless traffic.
Syntax
pfc no-drop queues queue-range
To remove the no-drop port queues, use the no pfc no-drop queues command.
Parameters
queue-range Enter the queue range. Separate the queue values with a comma; specify a priority range
with a dash; for example, pfc no-drop queues 1,3 or pfc no-drop queues 7
or pfc no-drop queues 0,7. The range is from 0 to 3.
Defaults No lossless queues are configured.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
• When you configure lossless queues on an interface, PFC priority configuration is not allowed on the dcb-map
profile applied on the interface.
• The maximum number of lossless queues globally supported on the switch is two.
The following lists the dot1p priority-queue assignments.
Data Center Bridging (DCB) 463