Administrator Guide

TX - PFC Frame Priority 6 0
TX - PFC Frame Priority 7 0
TX - Debug Counter 0 0
TX - Debug Counter 1 0
TX - Debug Counter 2 0
TX - Debug Counter 3 0
TX - Debug Counter 4 0
TX - Debug Counter 5 0
TX - Debug Counter 6 0
TX - Debug Counter 7 0
TX - Debug Counter 8 0
TX - Debug Counter 9 0
TX - Debug Counter 10
Example (Details)
**************************
bcmLinkMonStatusShow: The Current Link Status Is
Front End Link Status 0x00000000 0x00000000 0x00000000 0x00000000
Front End Port Presence 0x00000000 0x00000000 0x00000000 0x00000000
Backplane Link Status 0x00000000
******************************************************
Link Status of all the ports in the Device - 0
The linkStatus of Front End Port 1 is FALSE
The linkStatus of Front End Port 2 is FALSE
The linkStatus of Front End Port 3 is FALSE
The linkStatus of Front End Port 4 is FALSE
The linkStatus of Front End Port 5 is FALSE
The linkStatus of Front End Port 6 is FALSE
The linkStatus of Front End Port 7 is FALSE
The linkStatus of Front End Port 8 is FALSE
[output truncated]
Related
Commands
• clear hardware system-flow — clear the statistics from selected hardware components.
• show interfaces stack-unit — display information on all interfaces on a specific S-Series stack member.
• show processes cpu (S-Series) — display the CPU usage information based on the processes running in an S-
Series.
• show system — display the current status of all the stack members or a specific member.
show hardware stack-unit buffer
Display the counters for the specified port, minimum guaranteed buffer of a priority-group, and the shared buffer.
Syntax
show hardware stack-unit stack-unit-number buffer {total-buffer | unit unit-
number {total-buffer | interface all {buffer-info | priority-group {id | all}
buffer-info | queue {id| all} buffer-info}}}
Parameters
stack-unit unit-
number
Enter the keywords stack-unit to select a particular stack member and then enter
one of the following command options to display a collection of data based on the option
entered.
buffer unit <0–0> Enter the keyword buffer. To display the total buffer statistics for the stack unit, enter
the keyword total-buffer. To display the buffer statistics for a specific unit, enter the
keyword unit and a unit number 0 .
interface interface
Enter the keyword interface followed by the keyword all to display buffer statistics for
all interface.
Enter any of the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
504 Debugging and Diagnostics