Administrator Guide

Dell EMC Operating System Version: 2.0

Dell EMC Application Software Version: 9-13(0-0)

Build Time: Wed Dec 13 10:10:40 2017

Build Path: /build/build06/SW/SRC

Dell EMC Networking OS uptime is 23 hour(s), 26 minute(s)

System image file is "users/smahadevan/6100"

System Type: S6100-ON

Control Processor: Intel Rangeley with 3 Gbytes (3203289088 bytes) of

memory, core(s) 4.

8G bytes of boot flash memory.

1 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/HU G (S6100-ON)

14 Ten GigabitEthernet/IEEE 802.3 interface(s)

2 Fifty GigabitEthernet/IEEE 802.3 interface(s)

4 Hundred GigabitEthernet/IEEE 802.3 interface(s)

upgrade boot

Upgrade the bootflash image or bootselector image.

Syntax

upgrade boot {all | bootflash—image | bootselector-image}stack-unit {stack—unit

—id | all}{booted | flash: | ftp: | scp: | tftp: | usbflash:}

Parameters

all Enter the keyword all to change both the bootflash and bootselector images.

bootflash-image Enter the keyword bootflash-image to change the bootflash image..

bootselector-

image

Enter the keyword bootselector-image to upgrade the BIOS system image.

stack-unit-id Enter the stack–unit–id to upgrade only the mentioned stack-unit .

all Enter the keywords all to upgrade the member stack-units.

booted Enter the keyword booted to upgrade from the current image on the device.

ftp: Enter the keyword ftp to follow it with the location of the source file in this form: //

userid:password@hostip/filepath, or press Enter to launch a prompt sequence.

tftp: Enter the keyword tftp to follow it with the location of the source file in this form: //

hostlocation/filepath, or press Enter to launch a prompt sequence.

flash: Enter the keyword flash to follow it with the location of the source file in this form: //

filepath, or press Enter to launch a prompt sequence.

usbflash: Enter the keyword flash to follow it with the location of the source file in this form: //

filepath, or press Enter to launch a prompt sequence.

A: Enter the keyword A to upgrade the bootflash partition A:.

B: Enter the keyword B to upgrade the bootflash partition B:.

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC

Networking OS Command Line Reference Guide.

The following is a list of the Dell EMC Networking OS version history for this command.

Version Description

9.10(0.0) Introduced on the S6100-ON.

78 File Management