Administrator Guide

• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
•
For a port channel interface, enter the keywords port-channel then a number.
Defaults None.
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping querier
Enable the MLD querier processing for the VLAN interface.
Syntax
ipv6 mld snooping querier
To disable the querier feature, use the no ipv6 mld snooping querier command.
Defaults Disabled
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
show ipv6 mld snooping groups
Display the IPv6 MLD snooping group information.
Syntax
show ipv6 mld snooping groups [group address] [summary] [interface interface
[detail]]
Parameters
group-address (Optional) Enter the multicast group addresss in the X:X:X:X::X format. The :: notation
specifies successive hexadecimal fields of zero.
summary (OPTIONAL) Enter the keyword summary to display a summary of groups.
interface interface Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
slot/port/subport information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the slot/
port/subport information.
Multicast Listener Discovery Protocol 947