Users Guide

Field Description
IPSecv6 policy name Name of the IPsec security policy applied to the interface.
inbound/outbound
ah
Authentication policy applied to inbound or outbound trac.
inbound/outbound
esp
Encryption policy applied to inbound or outbound trac.
spi Security policy index number used to identify the policy.
transform Security algorithm that is used to provide authentication, integrity, and condentiality.
in use settings Transform that the SA uses (only transport mode is supported).
replay detection
support
Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS ACTIVE: The authentication or encryption policy is enabled on the interface.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary |
grace-lsa]
Parameters
process-number Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display neighbors
corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
database-summary
(OPTIONAL) Enter the keywords database-summary to view a summary of database
LSA information.
grace-lsa
(OPTIONAL): Enter the keywords grace-lsa to display the Type-11 Grace LSAs sent
and received on an OSPFv3 router.
Defaults None
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1180 Open Shortest Path First (OSPFv2 and OSPFv3)